DITL_506.txt
Items: (2 entries)
  0:
    Bounds: x1=267, y1=102, x2=337, y2=120
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=60, y1=10, x2=330, y2=90
    Type: -120
    Info: 'There was no response from the modem.  Please make sure it is turned on and properly connected to the external modem port.'

DITL_505.txt
Items: (2 entries)
  0:
    Bounds: x1=267, y1=102, x2=337, y2=120
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=60, y1=10, x2=330, y2=90
    Type: -120
    Info: 'A modem port error occurred.

OsErr = ^0'

DITL_504.txt
Items: (2 entries)
  0:
    Bounds: x1=267, y1=102, x2=337, y2=120
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=60, y1=10, x2=330, y2=90
    Type: -120
    Info: 'Sorry, your System file does not properly support hardware flow control.

Hardware flow control requires a System newer than System 4.2.'

DITL_503.txt
Items: (2 entries)
  0:
    Bounds: x1=267, y1=102, x2=337, y2=120
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=60, y1=10, x2=330, y2=90
    Type: -120
    Info: 'Sorry, your Macintosh does not support hardware flow control.

At least a Macintosh Plus is required.'

DITL_502.txt
Items: (3 entries)
  0:
    Bounds: x1=267, y1=133, x2=337, y2=151
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=60, y1=10, x2=331, y2=41
    Type: -120
    Info: 'Your cable is NOT properly wired for RTS/CTS flow control.'
  2:
    Bounds: x1=60, y1=51, x2=334, y2=118
    Type: -120
    Info: 'You can order a properly wired cable by calling (404) 441-1617, or by using your modem to call the Hayes bulletin board at (800) US-HAYES or (404) HI-MODEM.'

DITL_501.txt
Items: (2 entries)
  0:
    Bounds: x1=267, y1=102, x2=337, y2=120
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=12, y1=10, x2=335, y2=91
    Type: -120
    Info: 'Your cable is properly wired to support RTS/CTS (hardware) flow control, as implemented in the V-series modem.'

DITL_500.txt
Items: (4 entries)
  0:
    Bounds: x1=81, y1=220, x2=167, y2=238
    Type: 4
    Info: 'Test Cable'
  1:
    Bounds: x1=205, y1=220, x2=291, y2=238
    Type: 4
    Info: 'Quit'
  2:
    Bounds: x1=15, y1=9, x2=359, y2=97
    Type: -120
    Info: 'This program is designed to be used with a Hayes V-series modem.  It performs a simple test to determine whether the connecting modem cable properly supports hardware flow-control as implemented in a V-series modem.'
  3:
    Bounds: x1=15, y1=102, x2=360, y2=188
    Type: 8
    Info: 'Before clicking the Test Cable button, please make sure that your V-series modem is connected to your Macintosh's external modem port, and that the modem is turned on and the cable properly connected.'